Home
What's New
ASB Members Area
ASB Home Page
Aviation Bookstore
Aircraft Certification
Aircraft Registration
Aircraft Inspections
Aircraft Records
FAA DAR | FAA DER
FAA Regulations
Advisory Circulars
FAA Definitions
FAA Acronyms
Forms | Documents
Reference Links
- Search this Site -
About Us
Contact Us

Subscribe To This Site
XML RSS
Add to Google
Add to My Yahoo!
Add to My MSN
Subscribe with Bloglines

FAR 91.411 - Altimeter system and altitude reporting equipment tests and inspections

(a) No person may operate an airplane, or helicopter, in controlled airspace under IFR unless—

(1) Within the preceding 24 calendar months, each static pressure system, each altimeter instrument, and each automatic pressure altitude reporting system has been tested and inspected and found to comply with appendices E and F of part 43 of this chapter;

(2) Except for the use of system drain and alternate static pressure valves, following any opening and closing of the static pressure system, that system has been tested and inspected and found to comply with paragraph (a), appendix E, of part 43 of this chapter; and

(3) Following installation or maintenance on the automatic pressure altitude reporting system of the ATC transponder where data correspondence error could be introduced, the integrated system has been tested, inspected, and found to comply with paragraph (c), appendix E, of part 43 of this chapter.

(b) The tests required by paragraph (a) of this section must be conducted by—

(1) The manufacturer of the airplane, or helicopter, on which the tests and inspections are to be performed;

(2) A certificated repair station properly equipped to perform those functions and holding—

(i) An instrument rating, Class I;

(ii) A limited instrument rating appropriate to the make and model of appliance to be tested;

(iii) A limited rating appropriate to the test to be performed;

(iv) An airframe rating appropriate to the airplane, or helicopter, to be tested; or

(3) A certificated mechanic with an airframe rating (static pressure system tests and inspections only).

(c) Altimeter and altitude reporting equipment approved under Technical Standard Orders are considered to be tested and inspected as of the date of their manufacture.

(d) No person may operate an airplane, or helicopter, in controlled airspace under IFR at an altitude above the maximum altitude at which all altimeters and the automatic altitude reporting system of that airplane, or helicopter, have been tested.

[Docket No. 18334, 54 FR 34308, Aug. 18, 1989, as amended by Amdt. 91–269, 66 FR 41116, Aug. 6, 2001; 72 FR 7739, Feb. 20, 2007]

Back to FAR Part 91 Main Page


 


If you find this website useful, please consider helping with its production by donating $10.

To say 'thank you' for your generosity, we will give you a bookmarked digital copy of the U.S./EASA Bilateral Aviation Safety Agreement.

To make a secure donation through PayPal click the button below:



Aviation Books and Videos



Free in our Members Area


Free in our Members Area



Aircraft Registration


Experimental Amateur Built Certification





Wellness Simplified